Used 40 Meter Concrete Pump Trucks for Sale in Tanzania
A customer in Tanzania ordered a used 40 meter concrete pump truck two days ago. We had cooperated five years ago, and this time they approached us and wanted to order a pump truck for their concrete transportation business. Our sales manager Jacky had in-depth communication with him and gave a comprehensive introduction to the product's performance, price, advantages, etc. The customer finally chose this used 40 meter concrete pump truck.
When purchasing a used 40 meter concrete pump truck for sale in Tanzania, first look at the overall performance and whether the performance of the pump truck matches the requirements of the project. Secondly, look at the price and the service. The value of products of different brands, different years, different usage, and different service quality is definitely different.
A used 40 meter concrete pump truck for sale in Tanzania is a device that integrates a pumping system for pumping concrete and a boom system for distributing on the chassis of a car. The pumping system uses the power of the chassis engine to pressurize the concrete in the hopper and send it into the vehicle. Inside the pipe, the pipe is attached to the boom, and the operator controls the movement of the boom to deliver the concrete pumped by the pumping system directly to the pouring point.
Used 40 meter concrete pump truck for sale in Tanzania operation process
Used 40 Meter Concrete Pump Trucks for Sale in Tanzania
Before pumping concrete, first pump clean water, check the stuck spots of each pipe to ensure that the seal is water-proof, and then pump the pipe lubricant. Generally, mortar is used, but cement slurry can also be used. Pour the mortar into the hopper and pressurize it. When the mortar is about to be pressurized, you can pour in concrete that meets the requirements and pressurize it normally. If the mortar pressurization is blocked, you can remove the front section of the pipe and remove the dehydration block inside it. Take it out, connect the piping, and it can operate normally.
When the used 40 meter concrete pump truck is running, it is strictly prohibited to put your hands into the hopper or water tank. During the pumping process, the concrete material should be ensured to be above the mixing axis, and no vacuum or no material is allowed to be pumped. If pumping is suspended for a long time, the pump must be turned on every (15-30) minutes, reverse the pump for 1-2 strokes, and then forward the pump for 1-2 strokes to prevent the concrete material in the pipe from condensing.
Compared with new vehicles, the price of used 40 meter concrete pump truck for sale in Tanzania is relatively low, and they also require patient, professional management and careful maintenance in the later period.
Precautions
1. Contact the front-end hose operator when starting or stopping pumping concrete. The bending radius of the front-end hose should be greater than 1m. Operators are not allowed to stand at the outlet of the pipe to prevent sudden eruption of concrete material from injuring people.
2. The conveying pipeline must be fixed and firmly padded. It is strictly forbidden to bend the conveying hose to prevent the hose from exploding. When the pipeline is blocked and pumped after treatment, the end of the soft joint will swing rapidly and concrete may be sprayed instantly. Workers are not allowed to get close to the hose.
3. Do not stand at the corner of the building, holding the end of the hose. The shaking of the hose or concrete spraying may cause the operator to fall.
Used 40 Meter Concrete Pump Trucks for Sale in Tanzania
